卷板機的保養作業概況

一級技能保養 按照"日常保護"項目進行，并增加下列作業。

1查看電氣體系各線路及零附件作業是否無缺。

2查看液壓體系油箱內的油位是否正常，及時彌補缺乏部分。

3油壓體系的動作查看，在最高作業下操作查看機器功能狀況。

4查看卷板機本體下輥軸承空隙及機架滑動導軌空隙。

5查看開式齒輪嚙合狀況。

1 check the electrical system each line and zero accessories operation is not missing.

2 check whether the oil level in the hydraulic system tank is normal, and make up for the lack of parts.

3 the operation of oil pressure system check, operate under the highest operation to see the machine function.

4 to inspect the gap between the lower roll bearing housing and the sliding rail gap of the frame.

5 look at open gear engagement.

二級技能保養液壓體系大保養：

1液壓油每一至兩年換油一次。

2換油時放空原油箱中的液壓油，查看油箱底部有無雜質，并清洗油箱。

3過濾器 每次換油時，過濾器應替換或完全清洗。

4各液壓控制元件（閥門）視狀況進行清洗。

1 hydraulic oil change oil every two years.

2 when changing oil, vent the hydraulic oil in the original tank, check whether there is impurity at the bottom of the tank, and clean the tank.

3 filter should be replaced or cleaned completely when changing oil every time.

4 each hydraulic control element (valve) is cleaned according to the condition.